Water sampling station EASYPRO

   

Reliable and individual

Designed to meet your every need, the EASYPRO system monitors and controls a range of water parameters in your swimming pool. The TOPAX^® MC multi-channel controller installed in the EASYPRO subjects the water parameters to constant measurement, keeping them within the target range. It enables you to control a large number of actuators and permits easy and intuitive operation. The multi-coloured LEDs provide an optical warning if the water parameters leave the target range. Automatic continuous recording of the water parameters and depiction of their development permit simple diagnosis  

EASYPRO components (fitted on the baseplate):

• TOPAX^® MC multi-channel controller
• Measuring cells and measuring cell fittings
• Sample water filter
• Flow control
• Flow controller DFR 45 with sampling water extraction point and installed temperature sensor
• Inflow and outflow tap
• Bracket for buffer solutions and buffer solutions for adjusting the measuring cells
• Multi-coloured LEDs
• Cover
• The measuring cells are partially packaged separately and not pre-installed.

For more information please visit our website www.topax-mc.de/en

 

More product views

    

EASYPRO for swimming pools			MB-C	ME-C	MC-C	MD-C	MP-C	MK-C	MBB-C		MEE-C
Dimensions (W x H x D)	with cover	mm	500 x 530 x 117 approx.		500 x 933 x 128 approx.				-		-
	without cover	mm	490 x 490 x 117 approx.		490 x 900 x 117 approx.				900 x 490 x 117 approx.		900 x 490 x 117 approx.
Sample water requirement		l/h	30 approx.						2 x 30 approx.
Sample water inflow and discharge			PE hose 6/8 + stop valve with G1/4 connection
Pressure resistance		bar	max. 6			max. 6, air gap required		max. 6
Pressure loss in the water sampling station		bar	0.3 approx.						2 x 0,3 approx.
Mesh size sample water filter		µm	300
Voltage supply			100 – 240 V AC, 50/60 Hz
Power consumption		W	max. 20
Analogue outputs for remote transmission			x 0/4 – 20 mA, working resistance max. 500 Ω
Disturbance variable input		mA	0/4 – 20
Interfaces			Ethernet TCP/IP or RS485 Modbus RTU (optional)
Protection class			IP65 (electronic controller)
Ambient temperature		°C	-5 to +45 (no exposure to direct sunlight)
Control characteristic			P, PI, PID or PD behaviour, control direction selectable with disturbance variable feed forward, 2-side control selectable
v inputs (depending on version)
Number of measuring inputs			2a		3b		4c	3b	2 x 1		2 x 2a
Free chlorine	mperometric 3-electrode measuring cell with potentiostat (DMZ3.1)	mg/l	0 – 15 d	-	0 – 15d	-	0 – 15 d		2 x 0 – 15		-
	Diaphragm-covered measuring cell	mg/l	-	-	-	0 – 10e	-		-
Total chlorine	Diaphragm-covered measuring cell	mg/l	-	-	-	-	0 – 10e	-
pH value	pH single-rod measuring cell	pH	2 – 12f or 0 – 14f						2 x 2 – 12f or 2 x 0 – 14f
Redox value	Redox single-rod measuring cell	mV	-	0 – 1000				-			2 x 0 – 1000
Conductivity conductive	Conductivity measuring cell (k=1)	mS/cm	-					0 – 2g), 0 – 20g) or 0 – 100g)	-
Temperature	Pt100	°C	5 – 45						2 x 5 – 45
Output modules (depending on version)
Number of output modules			up to 4
Servomotor relay			2 x 230 V AC, 5 A (ohmic load)
		kΩ	Potentiometer feedback: 1 – 10
Servomotor 20 mA			Constant 0/4 – 20 mA output
			Servomotor with 20 mA feedback
Relays			2 x 230 V AC, 5 A (ohmic load)
Optocoupler			2 x 80 V DC, 5 mA

         

^a) A temperature sensor can also be connected.
^b) Additionally, up to two temperature sensors can be connected.
^c) Additionally, up to three temperature sensors can be connected.
^d) Dependant on the measuring cell transconductance.
^e) Depandant on the measuring cell.
^f) Depandant on the single-rod measuring cell.
^g) Depending on the configuration, corresponds to approx. 0 – 1 % or 0 – 5 % salt content
Subject to technical changes.

   

Operating instructions


•  EASYPRO
•  EASYPRO


Product information


•  EASYPRO
•  EASYPRO