Water sampling station EASYPRO

   

Reliable and individual

Designed to meet your every need, the EASYPRO system monitors and controls a range of water parameters in your industrial application. The TOPAX^® MC multi-channel controller installed in the EASYPRO subjects the water parameters to constant measurement, keeping them within the target range. It enables you to control a large number of actuators and permits easy and intuitive operation. The multi-coloured LEDs provide an optical warning if the water parameters leave the target range. Automatic continuous recording of the water parameters and depiction of their de-velopment permit simple diagnosis.  

EASYPRO components (fitted on the baseplate)

• TOPAX^® MC multi-channel controller
• Measuring cells and measuring cell fittings
• Sample water filter
• Flow control
• Flow controller DFR 45 with sampling water extraction point and installed temperature sensor
• Inflow and outfl ow tap
• Bracket for buffer solutions and buffer solutions for adjusting the measuring cells
• Multi-coloured LEDs
• Cover
• The measuring cells are partially packaged separately and not pre-installed.

For more information please visit our website www.topax-mc.de/en

 

More product views

    

EASYPRO for industrial applications			1	2	3	4	1/1		2/2
Dimensions (W x H x D)	with cover	mm	500 x 530 x 117 approx.		500 x 933 x 128 approx.		-		-
	without cover	mm	490 x 490 x 117 approx.		490 x 900 x 117 approx.		900 x 490 x 117 approx.		900 x 490 x 117 approx.
Sample water requirement	With CS120 excess chlorine measuring cell	l/h	45 approx.	-
	With all other measuring cells		30 approx.				2 x 30 approx.
Sample water inflow and discharge			PE hose 6/8 + stop valve with G1/4 connection
Pressure resistance	With diaphragm-covered measuring cell	bar	max. 6, air gap required
	With all other measuring cells		max. 6
Pressure loss in the water sampling station		bar	0,3 approx.
Mesh size sample water filter		µm	300
Voltage supply			100 – 240 V AC, 50/60 Hz
Power consumption		W	max. 20
Analogue outputs for remote transmission			4 x 0/4 – 20 mA, working resistance max. 500 Ω
Disturbance variable input		mA	0/4 – 20
Interfaces			Ethernet TCP/IP or RS485 Modbus RTU (optional)
Protection class			IP65 (electronic controller)
Ambient temperature		°C	-5 to +45 (no exposure to direct sunlight)
Control characteristic			P, PI, PID or PD behaviour, control direction selectable with disturbance variable feed forward, 2-side control selectable
v inputs (depending on version)
Number of measuring inputs			1	2a)	3b)	4c)	2 x 1		2 x 2a)
Bromine	Diaphragm-covered measuring cell	mg/l	0 – 5e)				-
Free chlorine	Amperometric 3-electrode measuring cell with potentiostat (DMZ3.1)	mg/l	0 – 15d)				2 x 0 – 15d)
	CS120 excess chlorine measuring cell	mg/l	0 – 10d)	-
	Diaphragm-covered measuring cell	mg/l	0 – 10e)				-
Chlorine dioxide	Amperometric 3-electrode measuring cell with potentiostat (DMZ3.1)	mg/l	0 – 15d)				-
	CS120 excess chlorine measuring cell	mg/l	0 – 10d)	-
	Diaphragm-covered measuring cell	mg/l	0 – 2e)				-
Total chlorine	Diaphragm-covered measuring cell	mg/l	0 – 10e))				-
Ozon	Membranbedeckte Messzelle	mg/l	0 – 2e)				-
pH value	pH single-rod measuring cell	pH	2 – 12f) or 0 – 14f)				2 x 2 – 12f) or 2 x 0 – 14f)
Redox value	Redox single-rod measuring cell	mV	0 – 1000				2 x 0 – 1000
Conductivity conductive	Conductivity measuring cell (k=1)	mS/cm	0 – 2g), 0 – 20g) oder 0 – 100g)				2 x 0 – 2g), 0 – 20g) oder 0 – 100g)
Chlorite	Diaphragm-covered measuring cell	mg/l	0 – 2e)				-
Hydrogen peroxide	Diaphragm-covered measuring cell	mg/l	0 – 200e)				-
Temperature	Pt100	°C	5 – 45 (standard version) 5 – 60 (can be configured via the Matchcode ordering system)
Output modules (depending on version)
Number of output modules			up to 4				2 x up to 4
Servomotor relay			2 x 230 V AC, 5 A (ohmic load)
		kΩ	Potentiometer feedback: 1 – 10
Servomotor 20 mA			Constant 0/4 – 20 mA output
			Servomotor with 20 mA feedback
Relay			2 x 230 V AC, 5 A (ohmic load)
Optocoupler			2 x 80 V DC, 5 mA

         

^a) A temperature sensor can also be connected.
^b) Additionally, up to two temperature sensors can be connected.
^c) Additionally, up to three temperature sensors can be connected.
^d) Dependant on the measuring cell transconductance.
^e) Depandant on the measuring cell.
^f) Depandant on the single-rod measuring cell.
^g) Depending on the configuration, corresponds to approx. 0 – 1 % or 0 – 5 % salt content.
Subject to technical changes.

   

Operating instructions


•  EASYPRO
•  EASYPRO


Product information


•  EASYPRO
•  EASYPRO